Model HP/12
|
Model HP/12
|
|
|
If floor space is a concern for your next
thermographer, then the Model HP/12 is your solution! Small enough to be
well suited for production facilities of all sizes and tough enough to
withstand 3 shift operation, our Model HP/12 will produce beautiful raised
printing and give you years of trouble-free operation.
|
|
|
SPECIFICATIONS: |
|
| Electrical Requirements | 208 or 220 Single Phase (60 amps) or 3 phase (45 amps), 60 cycle |
| Floor Space | Length 13.5 feet (fully
extended) Height 55 inches Width 35 inches |
| Heat | 10,200 watts (using both zones)
or 5,400 watts (using one zone only) |
| Maximum Production Speed | 8,000 iph tested on 8.5x11 60lb. cover stock |
| Stock Size | 11 x 17 |
| Weight | 1000 lbs. |